Start a new topic

Low Extruder Temperature on Makerbot 2

The temperature is set at 230 and starts the build at 230 but will drop and fluctuate between 215 to 220 during the build.

Once, It quite with the #3 error for the extruder temp to being to low.

what is the most probable problem?

The Cable, the Thermocouple or the Heater Cartridge? 


1 Comment

Believe this was transferred to a ticket, but for the benefit of thise reading at home see:

Most likely a damaged thermocoupler - see article re diagnostics etc

Login or Signup to post a comment