Hints Tips and Trouble shooting Guides

Using your Makerbot Digitizer 3D scanner - hints tips and troubleshooting guides

Scanning shiny or reflective objects with the Makerbot Digitzer 3D Scanner
Scanning shiny or reflective objects with the Makerbot Digitzer 3D Scanner Not all objects or materials were created equal when it comes to reflecting...
Mon, 1 Sep, 2014 at 11:04 AM
Geometry Vs Marker Mode with Calibry scanner
The calibry scanner has 3 scanning modes (selected on the scanner before you start scanning, please refer to manual) Texture modeĀ  Geometry Mode Marker ...
Mon, 17 Jan, 2022 at 4:17 PM
What can the Makerbot Digitizer Scan, and what it can not!
What can the Makerbot Digitizer Scan, and what it can not! This is a bit of a warts and all review of the Makerbot Digitizer, 3d scanner. In fact it...
Sat, 18 Oct, 2014 at 5:50 AM
Connecting and Calibrating your Makerbot Digitizer 3D Scanner to your PC
Connecting your Makerbot Digitizer 3D Scanner to your PC It is important that you do things in the correct order to have your Makerbot Digitizer 3D Sc...
Thu, 29 Jan, 2015 at 4:06 PM