The below prices are a guide on how pricing through the print service works. We charge a $35 set-up fee to slice your file and for the machine's time/set-up, plus the costs of material- as you can see below. Because these are familiar models, they are able to be printed without set-up time and so they are available to purchase without any set-up fee.
For other models, simply upload your .stl or .obj file to our online quote system (https://www.bilby3d.com.au/3DPrintService.asp) and select your material/colour and shipping method for an immediate quote. If you are unsure or have specific requirements, simply click the manual check request button and a Print Service team member will create an internal quote for you. Please be sure to state the material/colour and shipping method when you are detailing your reasons for submitting a manual check, to ensure that the Print Service team member has the information they need to create a quote for you.
If your model fails to upload, it is most likely either because you model exceeds our default build area, roughly 15cm^2 even though our largest machine has the capacity to print 30.5x30.5x47.5cm, or has hidden errors that are not readily apparent in the modelling software. NetFabb, a free software, is capable of identifying these errors and can even repair simple errors, saving the hassle of remodeling. If your model does not have any highlighted lines or faces when executing the repair function, then your model is 'print ready' and you should be able to upload with no problems.
Printed On: R2
Resolution: 300 microns
Shells: 4 shells
Fill: 10%
Time: 9 hours
Weight: 205 grams
Price: $29.20
Colonel
Printed On: R2 / R2X / R5 / Z18 / Mini / FFD / FFF
Resolution: 200 microns
Shells: 2 shells
Fill: 5%
Time: 2-9 hours
Weight: 115 grams
Price: $11.60 - $25.60
Elephant
Printed On: R2
Resolution: 200 microns
Shells: 3 shells
Fill: 10%
Time: 22 hours
Weight: 200 grams
Price: $122.00
Geared Heart
Printed On: R2
Resolution: 200 microns
Shells: 5 shells
Fill: 15%
Time: 57 hours
Weight: 755 grams
Price: $50.00
Groot (using Wood blended PLA)
Printed On: R5
Resolution: 200 microns
Shells: 4 shells
Fill: 10%
Time: 5 hours
Weight: 45 grams
Price: $21.65
Helmet Head
Printed On: R2
Resolution: 200 microns
Shells: 3 shells
Fill: 10%
Time: 1.5 hours
Weight: 25 grams
Price: $7.00
Mario Medal
Printed On: R2
Resolution: 200 microns
Shells: 4 shells
Fill: 5%
Time: 3 hours 15 minutes
Weight: 50 grams
Price: $11.50
Opera House
Printed On: R2
Resolution: 200 microns
Shells: 4 shells
Fill: 0%
Time: 1 hour
Weight: 15 grams
Price: $5.60
Rhino
Printed On: R2
Resolution: 200 microns
Shells: 2 shells
Fill: 10%
Time: 4 hours
Weight: 60 grams
Price: $13.40
Rocket
Printed On: Z18
Resolution: 300 microns
Shells: 2 shells
Fill: 0%
Time: 7 hours
Weight: 110 grams
Price: $21.40
St Basil's Cathedral
Printed On: Z18
Resolution: 100 microns
Shells: 4 shells
Fill: 5%
Time: 99 hours
Weight: 815 grams
Price: $531.60
SteamPunk Cube (200%)
Printed On: R2
Resolution: 200 microns
Shells: 4 shells
Fill: 5%
Time: 36 hours
Weight: 400 grams
Price: $91.00
Tiki Figure
Printed On: R2
Resolution: 200 microns
Shells: 4 shells
Fill: 5%
Time: 3.5 hours
Weight: 55 grams
Price: $12.20
T-Rex – Small
Printed On: R2
Resolution: 200 microns
Shells: 3 shells
Fill: 0%
Time: 1 hour 45 minutes
Weight: 10 grams
Price: $6.90
T-Rex – Large
Printed On: Z18
Resolution: Jaw/Skull - 100 microns
Shells: Jaw/Skull – 5 shells
Fill: Skull – 10%, Jaw - 5%
Time: Jaw/Skull – 21 hours,
Weight: 750 grams
Price: $156.50
Turbine (Mini)
Printed On: Z18
Resolution: 200 microns
Shells: 2 shells
Fill: 0%
Time: 23 hours
Weight: 265 grams
Price: $129.60
Venus De Milo
Printed On: Z18
Resolution: 300 microns
Shells: 6 shells
Fill: 5%
Time: 23 hours
Weight: 500 grams
Price: $69.00
Wire Frame Hands (mini)
Printed On: R2
Resolution: 100 microns
Shells: 2
Fill: 0%
Time: 45 minutes
Weight: 10 grams
Price: $5.40
Bilby3D hope you found this helpful