Extruders - From filament load, flow rate, to extrusio
About the cable
The thermocoupler (see Fig 1.1) is brown in colour and screws into the back of the aluminum heater block with a hex nut connector (...
Tue, 9 Aug, 2016 at 1:15 PM
Sometimes filament can get jammed in the hot end
of your 3D printer. While this is very annoying it happens to most 3D
printers from time to time.
...
Tue, 19 Jul, 2016 at 5:09 PM
What is it?
A thermocouple is the device that tells
the machine how hot the nozzle is. These can sometimes break if they
got too hot or are bumped.
...
Thu, 4 Feb, 2016 at 6:07 PM
Symptoms :
- The extruder assembly does not sit firm
- It is impossible to align left and right nozzle
- Nozzles seem to move if I push them/When bump...
Thu, 9 Jun, 2016 at 3:24 PM
If you are running the latest Flashforge firmware, version 7.2 at time of writing, you may have noticed that the unload function appears like ...
Mon, 27 Jun, 2016 at 5:43 PM